| 
SWITCH 8
FUNCTION CONTROLLER
This unit is
user-installable
on virtually all
radio-control systems.
The SWITCH 8
Function Control System
is designed to control
up to 8 on/off functions
from one channel
of the radio system.
The unit consists of
2 parts; the decoder
section which is
installed in the model,
and the eight-button
keypad which mounts
on the transmitter.
Works
great with
accessories like the
VARI-VOLT
REVERSING RELAYS
|
|
• Installs
on just ONE channel!
• Decoder operates from 6 –16
• volts.
• Each switch function can
• control up to 3 amps of current
• Each switch function can be
• independently set for either
latched or momentary function
• Keypad(s) can be easily
installed on most current radio
transmitters (those with three
wires going to the control pots
or landing gear switch)
• 1 small hole is required to be
• drilled in case
• 2 levels of security are
user-settable
• increased level for "noisy"
situations
• Loss of signal switch can be
set to either leave latched
functions upon loss of radio
signal or turn them off
• optically isolated from
receiver
• No power used from receiver
battery
• 1 YEAR Limited Warranty |
SWITCH 8
Dimensions & Weight:
• Keypad: 3.25"L. x .625"W. x .50"H.;
• Decoder: 2.25”L. x 2.25”W. x .75”H.
• Weight: 2 oz.
|
|
